Home | Contact Us
home Jaw Crusher_Crusher Series_Mining Equipments_Price of Jaw Crusher_Seller of Jaw Crusher--

Jaw Crusher

Jaw Crusher
1) Introduction to the Jaw crusher:

Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material is 320MPa. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry.

2) Working Principle of Jaw Crusher:

The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves . So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.

3) Jaw Crusher Main Features and Benefits:
 1. Flexible capacity and high reliability
     2. Simple structure and easy maintenance, jaw crusher mainly consists of two jaws
     3. Over-loading protection, jaw crusher has toggle plate to protect it.
     4. Stable performance, low operating cost
     5. High crushing ratio which can reach 4-6, also high resistance to friction, abrasion and compression with longer operating life span


 4)Jaw Crusher Installation Instructions:

     1. jaw crusher is installed by the factory, the user should be checked after the receipt of the jaw crusher machine and eliminate the various problems arising from transport, and then install it.
     2. rack installation, the vertical plane at the end of the level of tolerance of 0.5mm / m, the horizontal level degrees (measured on the spindle) Tolerance of 0.15 mm / m.
     3. comprehensive inspection before starting the jaw crusher machine. The fastening of the fixed parts, each part of the ubrication as well as V-belt tension level is to check the suitability of the like should be the focus.
     4. Check the overall circuit after cuting off jaw crusher switch, and a clear sign hanging switch.

Main Technical Parameters of Jaw Crusher:

Model Max. Feeding Size (mm) Discharge Size (mm) Capacity (t/h) Motor Power (kW) Overall Dimensions (mm) Weight (t)
PE150×250 125 10-40 1-3 5.5 896×745×935 0.8
PE250×400 200 20-60 5-20 15 1150×1275×1240 2.8
PE400×600 350 40-100 15-60 30 1700×1732×1653 6.5
PE500×750 425 50-100 50-100 55 2035×1921×2000 10.3
PE600×900 480 65-160 60-130 75 2290×2206×2370 16.5
PE750×1060 630 80-140 80-180 110 2620×2302×3110 29
PE900×1200 750 95-165 140-260 110 3789×2826×3025 54.5
PE1000×1200 850 195-265 315-550 110 3335×3182×3025 57
PE1200×1500 1020 150-300 400-800 160-220 4200×3750×3820 100.9
PEX250×750 210 25-60 10-40 22 1667×1545×1020 5
PEX250×1000 210 25-60 15-50 30 1550×1964×1380 6.5
PEX250×1200 210 25-60 20-60 37 1560×2104×1415 7.7
Jaw Crusher,Crusher Series,Mining Equipments,Price of Jaw Crusher,Seller of Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material is 320MPa.